11.4.3 Manual Absolute Switch
M720VW
M system
○
L system
○
The program absolute positions are updated by an amount equivalent to the distance by which the tool is
moved by hand when the manual absolute switch signal is turned ON.
In other words, the coordinate system based on the original program will not shift even if the tool (machine)
is moved by hand. Thus, if automatic operation is started in this case, the tool will return to the path before
manual movement.
W
- Y
(a) Feed hold stop
(b) Programmed path (absolute command)
(c) Manual interrupt (Program absolute position is updated by an amount equivalent to traveled
value.)
(d) Path after manual interrupt
(e) Tool passes along same path as that programmed
(f) With manual absolute signal ON
M730VW
M750VW
○
○
○
○
(a)
(c)
(d)
(e)
(f)
M700V Series Specifications Manual
11 Operation Support Functions
M720VS
M730VS
M750VS
○
○
○
○
X
(b)
○
○
III - 175