Mitsubishi Electric M700V Series Manual page 152

MITSUBISHI CNC
III Functional Specifications
10.1.10 Origin Set/Origin Cancel
M720VW
M system ○
L system ○
(1) Origin set
Origin set is a function that shifts the coordinate system so that the current position is the zero point
on the workpiece coordinate system containing the workpiece coordinate system's offset value.
The relative position counter and workpiece coordinate counter are set to "0" with this operation. In
other words, this is the same as the coordinate system setting command "G92 X0;". (For target
axis: X)
III - 150
M730VW M750VW M720VS
○ ○
○ ○
G92 offset (10, 15)
Machine zero
point
Machine
zero point
Items updated by origin set
M730VS M750VS
○ ○ ○
○ ○ ○
Current coordinate
(50, 30)
Workpiece coordinate
zero point
Workpiece offset (10, 15)
Execution of origin set
Current coordinate
(0, 30)
Workpiece
coordinate
zero point
Workpiece offset (10, 15)
G92 offset (60, 15)