Maintenance And Repair; Safety Inspection; Disposal - Fronius Robacta Reamer V Comfort Operating Instructions Manual

The device must be examined at least once a week for externally detectable dam-
age and functionality of the safety devices.
-
-
-
-
-
Maintenance and It is impossible to guarantee that bought-in parts are designed and manufac-
repair tured to meet the demands made of them, or that they satisfy safety require-
ments.
-
-
-
-
The housing screws provide the ground conductor connection for earthing the
housing parts.
Only use original housing screws in the correct number and tightened to the spe-
cified torque.
Safety Inspec- The manufacturer recommends that a safety inspection of the device be per-
tion formed at least every 12 months.
A safety inspection by a certified electrician is recommended:
-
-
-
-
For the safety inspection, follow the appropriate national and international
standards and guidelines.
You can obtain more information about the safety inspection and calibration
from your service center. The service center will provide the necessary docu-
ments upon request.

Disposal

To comply with European directives and national law, waste electrical and elec-
tronic equipment must be collected separately and sent for environmentally-
friendly recycling. Used devices must be returned to a distributor or an approved
collection and recycling facility in your area. Proper disposal of used devices pro-
motes the sustainable recycling of material resources. Ignoring this may have po-
tentially adverse effects on the environment and your health.
Packaging materials
Materials collected separately. Check the regulations in your area. Reduce the
volume of cardboard.
Only use appropriate original parting agents from the manufacturer.
When handling parting agent, observe the information on the parting agent
safety data sheet. The parting agent safety data sheet can be obtained from
your service center or via the manufacturer's website.
Do not mix parting agents from the manufacturer with other parting agents.
If damage occurs due to the use of other parting agents, the manufacture is
not liable for this and all warranty claims are forfeited.
Properly dispose of used parting agent according to national and internation-
al regulations.
Use only original spare and wearing parts (also applies to standard parts).
Do not carry out any modifications, alterations, etc. to the device without the
manufacturer's consent.
Components that are not in perfect condition must be replaced immediately.
When ordering, please give the exact designation and part number as shown
in the spare parts list, as well as the serial number of your device.
after changes
after alterations
after repair, care, and maintenance
at least every 12 months.
9