Installation Unpacking - Intermec EasyCoder F2 Installation And Operation Manual

Installation
Unpacking
Intermec EasyCoder F2 – Installation & Operation Ed. 1
Before you install the printer, examine the delivery for possible dam-
age or missing parts:
• Open the box and lift the printer out.
• Check that the printer has not been visibly damaged during
transportation. Keep the packing materials in case you need to
move or reship the printer.
• The label on the printer's rear plate gives the voltage, the part
number and the serial number.
• Check that any options you ordered are included.
• Check that all the accessories are included in the delivery. In
addition to any separately ordered options, the box should contain:
- Intermec EasyCoder F2 printer
- Adapter for 3" paper roll core (only in models fitted with a
rotating paper supply spool)
- Power cord (at least one depending on model)
- Quality check card
- Cleaning card
- User's Guide (multilingual)
- Installation & Operation manual
• Check that the power cord is appropriate for the local standard.
The printer works within 100 – 240 V AC, 50 – 60 Hz.
European type
230V mains plug
If the printer has been damaged in any way during transportation,
complain to the carrier immediately.
If the delivery is incorrect or any parts are missing, report it imme-
diately to the distributor.
US/Canadian type
115V mains plug
Chapter 3
GB type
230V mains plug
16