Intermec EasyCoder F2 Installation And Operation Manual page 31

Tear-Off, cont'd.
3 a
Remove any empty paper core from the paper
supply spool, or....
4 a
Fit a new roll of direct thermal paper on the
paper supply spool and press it inwards as far
as it will go, or....
Intermec EasyCoder F2 – Installation & Operation Ed. 1
3 b
...remove any empty paper core from the paper
supply hanger.
4 b
...hook a new roll of direct thermal paper on the
paper supply hanger and adjust the guide so the
paper roll comes in flush with the wall.
Chapter 5 Paper Load
30