Changing The Setup - Intermec EasyCoder F2 Installation And Operation Manual

Terminal Setup, cont'd.

Changing the Setup

Intermec EasyCoder F2 – Installation & Operation Ed. 1
If you want to set up the printer or use any other of the facilities,
you should answer N (=No) to the "Select Application" prompt.
The following example illustrates how to enter the Setup Mode:
----------------
SHELL
SEL. APPLICATION
----------------
(Y / N / B):N
----------------
SHELL
SETUP
----------------
(Y / N / B):Y
----------------
SETUP:
SER-COM,UART1
From here you can navigate through the Setup Mode by means of
keys on a VT100 terminal according to the same principles as when
using the printer's own keyboard (see overviews in chapter 8):
Key Action
u Move one menu to the left on the same level (same
as <F1>).
d Move one menu to the right on the same level (same
as <F2>).
e Display error message at test label printing failure
(same as <F3>).
b Move up one level or scroll back in a stack of menus
(same as <F4>).
f Move down one level or scroll forward in a stack of
options (same as <F5>).
x Exit the setup (same as <Setup>).
0 – 9 Enter numeric values.
. Specify negative values (same as < . >).
Enter Acknowledge and move to next menu, perform
testfeeds, or print test labels (same as <Enter>).
Backspace Delete one character to the left of the cursor (same
as <C>).
Chapter 8 Intermec Shell Startup Program
67