Intermec EasyCoder F2 Installation And Operation Manual page 77

Bar code label printer

Hide thumbs Also See for EasyCoder F2:

Table of Contents

Chapter 11

Maintenance

Printhead Cleaning, cont'd.

Wait for approx. 30 seconds to allow the

Insert most of the cleaning card under the

cleaning fluid to dissolve the residue.

printhead (1) again. Close the printhead (2).

Pull out the cleaning card. If necessary, repeat

Allow the cleaned parts to dry before loading

the process with a new cleaning card.

any paper.

Intermec EasyCoder F2 – Installation & Operation Ed. 1

Table of Contents