Options Introduction - Intermec EasyCoder F2 Installation And Operation Manual

Options
Introduction
Upper Tear-off Edge
Label-Taken Sensor
Short Side Door
Intermec EasyCoder F2 – Installation & Operation Ed. 1
The EasyCoder F2 is designed to provide a high degree of flexibil-
ity by means of a modular design. By adding a collection of op-
tional devices to the basic concept, the printer can be adapted for a
variety of applications. Most options can easily be installed by the
operator whereas some options should be installed by an author-
ized service technician, or are only available as factory-installed
options.
Below is a description of some of the many options available for
EasyCoder F2.
Chapter 9
Paper Supply Spool
Paper Supply Hanger
3" Adapter (std)
Rewinder &
Guide Shaft
Long Side Door
Quick-Load Guides
70