Paper Load Tear-Off - Intermec EasyCoder F2 Installation And Operation Manual

Paper Load
Tear-Off
1
Open the side door.
Intermec EasyCoder F2 – Installation & Operation Ed. 1
The EasyCoder F2 can print on labels, tickets, tags, and paper strip
in various forms. This chapter describes the case when the paper
strip is to be torn off manually against the printer's tear-off edge.
Use the <Feed> key (see figure #10) when loading the same type
of paper as before. When switching to a new type of media or when
the printer does not feed out the paper properly, simultaneously press
the <Shift> and <Feed> keys.
Tear-off can be used for:
• Non-adhesive continuous paper strip
• Self-adhesive continuous paper strip
• Self-adhesive labels on backing paper
• Tickets with gaps, with or without perforations
• Tickets with marks, with or without perforations
2
Turn the printhead lift knob clockwise to lift the
Chapter 5
printhead.
29