Intermec EasyCoder F2 Installation And Operation Manual page 35

Tear-Off with Quick-Load, cont'd.
2 a
Fit a new roll of direct thermal paper on the
paper supply spool and press it inwards as far
as it will go, or....
3
In necessary, adjust the outer guide to fit the
width of the paper.
Intermec EasyCoder F2 – Installation & Operation Ed. 1
2 b
...hook a new roll of direct thermal paper on the
paper supply hanger and adjust the guide so the
paper roll comes in flush with the wall.
4
Insert the paper between the guides and feed it
forward until the paper reaches the platen roller
and cannot be inserted any further.
Chapter 5 Paper Load
34