Declaration Of Safety Conformity And Ce Marking; Inquiries; Operation - ABB PowerValue 11 RT G2 IN User Manual

U S E R M A N U A L
1.3 Declaration of safety
conformity and CE marking
The PowerValue 11 RT G2 IN 1-3 kVA is designed,
manufactured and commercialized in accordance
with the EN ISO 9001 standard relating to quality
management systems.
These products conform with the following
directives:
• 2014/35/EU Low voltage directive
• 2014/30/EU Electromagnetic Compatibility
directive (EMC)
• 2011/65/EU Restriction of the use of certain
hazardous substances (RoHS) directive
WARNING!
This is a category C2 UPS product. In a
residential environment, this product
may cause radio interference, in which
case the user may be required to take
additional measures.

1.4 Inquiries

Inquiries regarding the UPS should be
addressed to the local ABB office or agent
authorized by ABB. Note the type code and
the serial number of the equipment before
contacting ABB or authorized agent. The
serial number is shown on the nameplate
of the product. For further information on
troubleshooting, see Chapter 6.

1.5 Operation

WARNING!
Do not disconnect the mains cable
from the UPS or the building wiring
socket during operation as this
removes the ground from the UPS
and all connected loads.
NOTE!
Press the off button to fully
disconnect the UPS. Ensure the UPS is
on bypass or on standby mode before
disconnecting it from the mains.
NOTE!
To reduce the risk of fire, connect the
UPS to a circuit provided with branch
circuit protection with an ampere rating
in accordance with the IEC/EN 60934
standard or your local electrical code.
These products also meet the following product
standards:
Table 1: Standards
Product standards
ESD IEC 61000-4-2 Level 3
Low frequency IEC 61000-2-2
signals Disturbing voltage:10V
RS IEC61000-4-3 Level 3
EFT IEC 61000-4-4 Level 4
Surge IEC 61000-4-5 Level 4
CS IEC 61000-4-6 Level 3
Power frequency
IEC 61000-4-8 Level 4
magnetic field immunity
Conducted IEC 62040-2 Category C2
Radiated IEC 62040-2 Category C2
Performance
VFI-SS-III
classification
Safety IEC 62040-1:2008+A1+2013
Transportation IEC 60068-2-31
IEC 60068-2-64
IEC 60068-2-27
See technical specifications for
recommendations.
WARNING!
Indiscriminate operation of
switches may cause output loss
or damage to equipment.
WARNING!
Never dispose of batteries in a fire as
they may explode.
WARNING!
Released electrolyte is harmful
to the skin and eyes.
7