Operation; Declaration Of Safety Conformity And Ce Marking; Inquiries - ABB PowerValue 11 RT Series User Manual

1.3 Declaration of Safety conformity
and CE marking
PowerValue 11 RT 6-10 kVA is designed, manufactured
and commercialized in accordance with the standard
EN ISO 9001 of Quality Management Systems.
These products are in conformity with the directives:
– 2014/35/EU Low voltage directive
– 2014/30/EU Electromagnetic Compatibility
directive (EMC)
– 2011/65/EU Restriction of the use of certain
hazardous substances (RoHS) directive
and with the following product standards:
Product Standards
Safety IEC/EN 62040-1:2008+A1:2013
EMC IEC/EN 62040-2:2006
RoHS IEC/EN50581:2012
Table 1: Standards

1.4 Inquiries

Address inquiries about the UPS to the local ABB office
or agent authorized by ABB. Note the type code and
the serial number of the equipment before contacting
ABB or authorized agent. The serial number is shown in
the nameplate of the product. For further information on
troubleshooting, see Chapter 6.
6 PowerValue 11 RT 6-10kVA | User manual

1.5 Operation

DO NOT DISCONNECT THE MAINS CABLE FROM
THE UPS OR THE BUILDING WIRING SOCKET
DURING OPERATION AS THIS REMOVES THE
GROUND FROM THE UPS AND ALL CONNECTED
CAUTION
LOADS.
PRESS THE OFF BUTTON TO FULLY DISCONNECT
THE UPS. WAIT UNTIL THE UPS IS ON BYPASS OR
ON STAND-BY MODE BEFORE DISCONNECTING IT
NOTE FROM THE MAINS.
TO REDUCE THE RISK OF FIRE, CONNECT THE
UPS TO A CIRCUIT PROVIDED WITH BRANCH
CIRCUIT OVERCURRENT PROTECTION WITH AN
AMPERE RATING IN ACCORDANCE WITH THE
IEC/EN 60934 STANDARD OR YOUR LOCAL
ELECTRICAL CODE.
NOTE
SEE TECHNICAL SPECIFICATIONS FOR
RECOMMENDATIONS.
INDISCRIMINATE OPERATION OF SWITCHES MAY
CAUSE OUTPUT LOSS OR DAMAGE TO
EQUIPMENT.
NOTE
This UPS can be connected to a maximum of four external
battery enclosures.
NEVER DISPOSE BATTERIES ON FIRE AS THEY
MAY EXPLODE.
WARNING
DO NOT OPEN OR MUTILATE THE BATTERIES.
WARNING
RELEASED ELECTROLYTE IS HARMFUL TO THE
SKIN AND EYES.
WARNING