ABB PowerValue 11 RT G2 IN User Manual page 24

24
POWERVALUE 11 RT G2 IN — 1-3 KVA
03: Output frequency settings
Interface
04: ECO enable/disable
Interface
05: ECO voltage range settings
Interface
Settings
Set up output frequency. You may set the initial frequency on battery mode:
50: output frequency is 50 Hz
60: output frequency is 60 Hz
If converter mode is enabled, you may choose from the following output frequency:
50: output frequency is 50 Hz
60: output frequency is 60 Hz
Settings
Enable or disable ECO function. You may choose the following two options:
ENA: ECO mode enable
DIS: ECO mode disable (Default)
Settings
Set the acceptable high voltage point and low voltage point for ECO mode by
pressing Down key or Up key
HLS: High loss voltage in ECO mode.
The setting range in parameter 2 is from 5% to 10% of the nominal voltage.
(Default: 5%)
LLS: Low loss voltage in ECO mode
The setting range in parameter 2 is from -5% to -10% of the nominal voltage.
(Default: -5%)