Lcd Panel - ABB PowerValue 11 RT G2 IN User Manual

22
POWERVALUE 11 RT G2 IN — 1-3 KVA

4.5 LCD panel

Table 6: Symbols in operating mode
Display Function
Indicates the remaining backup time in pie chart.
Indicates the remaining backup time in numbers.
H: hours, M: minutes, S: seconds
Indicates warning and fault.
Indicates the warning and fault code. Code details are listed in section 3.5.
Indicates that the UPS alarm is disabled.
Indicates the input voltage, frequency, output voltage, battery voltage, output current, battery
capacity, load percent, output power, positive bus voltage, negative bus voltage, temperature,
output receptacle 1, output receptacle 2.
Indicates the load level: 0-25%, 26-50%, 51-75%, and 76-100%.
Indicates overload.
Indicates the UPS is connected to the mains.
Indicates the battery is working.
Indicates the bypass circuit is working.
Indicates the ECO mode is enabled.
Indicates the inverter circuit is working.
Indicates the output is working.
Indicates the battery level: 0-25%, 26-50%, 51-75%, and 76-100%.
Indicates low battery level and low battery voltage.
Indicates UPS is in settings mode.