Intended Use; Indications For Use; Environmental Conditions - Otto Bock 1S49 SACH Instructions For Use Manual

1.2 Combination possibilities
This prosthetic component is compatible with Ottobock's system of modular
connectors. Functionality with components of other manufacturers that have
compatible modular connectors has not been tested.
Permissible ankle blocks and screw connections
Foot size [cm]
24 to 25
26 to 30
Prosthetic foot
1S67
1S49, 1S66,
1S90

2 Intended use

2.1 Indications for use

The product is to be used solely for lower limb prosthetic fittings.
2.2 Area of application
Our components perform optimally when paired with appropriate compon­
ents based upon weight and mobility grades identifiable by our MOBIS clas­
sification information and which have appropriate modular connectors.
The product is recommended for mobility grade 1 (indoor walk­
er) and mobility grade 2 (restricted outdoor walker).
m°
kg
• The maximum approved body weight is specified in the technical data
(see Page 19).

2.3 Environmental conditions

Allowable environmental conditions
Temperature range for use: -10 °C to +60°C
Allowable relative humidity 0 % to 90 %, non-condensing
12
Reference number (ankle block and screw connection)
Permissible foot adapters
Size [cm] Body weight
22 to 25
26
26
21 to 30
26 to 30
2K34=25 and 2Z22=M10
2K34=30 and 2Z22=M10
Permissible foot adapter
[kg]
≤100
101 to 125
≤100
101 to 125
2R8=M8, 2R31=M8,
2R54=M8
2R8=M10, 2R31=M10,
2R54=M10
2R8=M10, 2R31=M10
2R8=M10, 2R31=M10,
2R54=M10
2R8=M10, 2R31=M10