Safety; Explanation Of Warning Symbols; Structure Of The Safety Instructions; General Safety Instructions - Otto Bock AxonSoft 2.2 560X500 V2.2 Instructions For Use Manual

4 Safety

4.1 Explanation of warning symbols

Warning regarding possible risks of accident or injury.
CAUTION

4.2 Structure of the safety instructions

CAUTION
The heading describes the source and/or the type of hazard
The introduction describes the consequences in case of failure to observe the safety instruc­
tions. Consequences are presented as follows if more than one consequence is possible:
> E.g.: Consequence 1 in case of failure to observe the hazard
> E.g.: Consequence 2 in case of failure to observe the hazard
This symbol identifies activities/actions that must be observed/carried out in order to avert
►
the hazard.

4.3 General safety instructions

CAUTION
Non-observance of safety instructions
Personal injury/damage to the product due to using the product in certain situations.
Observe the safety instructions and the stated precautions in this accompanying document.
►
CAUTION
Operator errors during the adjustment procedure
Injury due to unexpected prosthesis behaviour.
Do not charge the prosthesis battery during the configuration process since the prosthesis
►
is not functional while the battery is being charged.
The prosthesis must not remain unattended during the configuration process while connec­
►
ted to the adjustment software and being worn by the patient.
Take note of the maximum range of the Bluetooth connection and note that obstacles may
►
limit this range.
During the data transfer (PC to prosthesis), the prosthesis wearer should remain sitting still
►
and the BionicLink PC must not be removed from the computer.
Inform the patient immediately if the data connection is accidentally interrupted during the
►
configuration process.
The connection to the prosthesis must always be disconnected after adjustments have been
►
completed.
Ottobock product training for the prosthesis must be completed before the first fitting. Addi­
►
tional product training may be required in order to qualify for product updates.
Use the online help which is integrated into the software.
►
Do not share your unlock PIN.
►
INFORMATION
Please note that observing the prescribed system requirements is mandatory.
►
It is recommended that you do not run any other programs during installation and use of the
►
adjustment software, since this can affect performance.
If you require further information, contact the Ottobock office responsible for your country.
►
19