Instructions For Use - Otto Bock Evanto 1C70 Instructions For Use Manual

page of 152

/ 152
Contents
Table of Contents
Bookmarks

Table of Contents

Available languages

Signs of changes in or loss of functionality during use

Reduced spring effect (e.g. decreased forefoot resistance or changed rollover behaviour) or

delamination of the spring are indications of loss of functionality. Unusual noises can indicate a

loss of functionality.

4 Scope of delivery

Quantity

5 Preparing the product for use

CAUTION

Incorrect alignment, assembly or adjustment

Injury due to incorrectly installed or adjusted as well as damaged prosthetic components

Observe the alignment, assembly and adjustment instructions.

►

NOTICE

Altering the prosthetic foot or footshell

Premature wear resulting from damage to the product

Do not alter the prosthetic foot or footshell.

►

5.1 Applying/removing the footshell

INFORMATION

Pull the protective sock over the prosthetic foot to prevent noises in the footshell.

►

► CAUTION! Always use the prosthetic foot with the footshell.

Apply or remove the footshell as described in the footshell instructions for use.

5.2 Bench Alignment

Bench alignment, transtibial prosthesis

Required materials: 662M4 goniometer, 743S12 heel height measuring device, 743A80

50:50 gauge, alignment apparatus (e.g. 743A200 PROS.A. Assembly)

1) Position the prosthetic foot in the alignment apparatus.

→ Heel height: effective heel height of everyday shoe + 5 mm

2) Sagittal plane: Align the prosthetic foot with the alignment reference line.

→ Position the alignment reference line on the markings of the footshell.

3) Frontal plane: Align the prosthetic foot with the alignment reference line.

→ Position the alignment reference line on the markings of the footshell (external rotation

approx. 5°).

4) Install the structural components between the prosthetic foot and prosthetic socket.

5) Sagittal plane: Align the prosthetic socket with the alignment reference line.

Designation