Instructions For Use - Otto Bock Harmony P4 4R180 Instructions For Use Manual

Warning regarding possible technical damage.
NOTICE
3.2 General safety instructions
CAUTION!
Risk of injury and risk of product damage
► Comply with the product's field of application and do not expose it to excessive strain (see
page 15).
► Note the combination possibilities/combination exclusions in the instructions for use of the
products.
► Do not expose the product to prohibited environmental conditions.
► Check the product for damage if it has been exposed to prohibited environmental conditions.
► Do not use the product if it is damaged or in a questionable condition. Take suitable meas­
ures (e.g. cleaning, repair, replacement, inspection by the manufacturer or a specialist work­
shop).
► To avoid the risk of injury and product damage, do not use the product beyond the tested life­
time.
► To avoid the risk of injury and product damage, only use the product for a single patient.
► To prevent mechanical damage, use caution when working with the product.
► If you suspect the product is damaged, check it for proper function and readiness for use.
► Do not use the product if its functionality is restricted. Take suitable measures (e.g. cleaning,
repair, replacement, inspection by the manufacturer or a specialist workshop).
Signs of changes in or loss of functionality during use
Among other factors, changes in functionality can be indicated by reduced prosthetic suspension.
4 Scope of delivery
Fig. 1, item
–
1
2
3
4
5
6
7
8
–
–
–
Designation
Elastomer rod (red)
Elastomer rod (yellow)
4 set screws M4x6
Lamination disc set (1 lamination disc, 1 lamination dummy)
Threaded-ring set for 4R180 (1 threaded ring for 4R180, 4 set screws M4x6)
16
Quantity Designation
1

Instructions for use

1 Harmony P4 with threaded ring and
lamination disc
1 Lamination dummy
1 Pin wrench for Harmony P4
1 Allen wrench, 2 mm
1 Rubber connector cap
1 Vacuum connector
1 Vacuum test connector
1 Connection set
4 Set screw
4 M4X6 set screw
For 4R181 only: elastomer rod (red)
1
Spare parts
Reference number
–
–
–
4X901
–
–
2R117=0
–
755Z39
506G3=M8x16
–
4Y347
Reference number
4Y347
4Y348
4X902
4X903
4X904