Instructions For Use - Otto Bock RS2-00 Runway Instructions For Use Manual

► To prevent mechanical damage, use caution when working with the
product.
► If you suspect the product is damaged, check it for proper function and
readiness for use.
► Do not use the product if its functionality is restricted. Take suitable
measures (e.g. cleaning, repair, replacement, inspection by the manu­
facturer or a specialist workshop).
NOTICE!
Risk of product damage and limited functionality
► Check the product for damage and readiness for use prior to each use.
► Do not use the product if its functionality is restricted. Take suitable
measures (e.g. cleaning, repair, replacement, inspection by the manu­
facturer or a specialist workshop).
► Do not expose the product to prohibited environmental conditions.
► Check the product for damage if it has been exposed to prohibited envir­
onmental conditions.
► Do not use the product if it is damaged or in a questionable condition.
Take suitable measures (e.g. cleaning, repair, replacement, inspection
by the manufacturer or a specialist workshop).
Signs of changes in or loss of functionality during use
Reduced spring effect (e.g. decreased forefoot resistance or changed
rollover behaviour) or delamination of the spring are indications of loss of
functionality. Unusual noises can indicate a loss of functionality.
4 Scope of delivery
Quantity Designation
1

Instructions for use

1 Prosthetic foot
1 Protective sock (black)
1 Heel wedge set
RS2-K1 Runway HX only: Adjust­
1
ment wrench
1 Shim wrench (1/8")
Additional accessories/spare parts (not included in the scope of delivery)
Designation
Footshell (without cap)
Reference number
–
–
S0-NPS-200*
KIT-00-1131*
ACC-00-10400-4M
ACC-00-10400-00
Reference number
Runway: FTC-3D-1*, Runway
HX: FTC-3E-1*
19