Table of Contents
Advertisement
Settings and assembly instructions
21
6.2.11 Attaching additional options
22
6.3 Settings
6.3.1 Basic settings
The following fitting tasks are described in more detail in the included Instructions for use (user):
•
Adjusting the height of the arm supports
•
Adjusting the back support angle
6.3.2 Adjusting the seat depth
The seat depth can be adjusted by repositioning the seat plate to the front or back.
23
6.3.3 Adjusting the arm pads
The width and depth position of the arm pads can be slightly adjusted.
18
Checking the storage bag
1) The front edge of the storage bag is approximately
in line with the front edge of the battery cover (see
fig. 21, item 1).
2) The magnetic closures can be readily applied to the
frame tube.
Bag for mobile phone: Attached to the side of the
•
arm support tube with hook-and-loop strap (see
fig. 22, item 1).
Beverage holder: Attached to the side of the arm
•
support tube with hook-and-loop strap (see fig. 22,
item 2).
•
Alternative seat cushion (according to order
form): Attached to the seat plate with hook-and-loop
closure (not illustrated).
1) Remove the seat cushion.
2) Loosen the six Allen head screws that attach the
seat plate (see fig. 23, item 1).
3) Move the seat plate to the desired position. Six pos
itions are available (seat depth = 380–480 mm).
4) Secure the seat plate. Firmly tighten the Allen head
screws.
5) Attach the seat cushion.
490E163=*
Advertisement
Table of Contents
