Adjusting Settings In Configuration Mode - Xantrex Freedom EX 4000 Owner's Manual

Adjusting Settings in
Configuration Mode
The , Scroll , and
through the various settings:
1. Press and hold the
Configuration mode and change general settings. Press the
button to enter sub-settings, if applicable.
2. Press the Scroll
button to scroll through the different
settings. Press and hold for three seconds to scroll back one
step.
1
INPUTBATTTEMP


kW
AC VA
% C
Hz
BYPASS
CHARGING
1 setting number is displayed here
2 setting value is displayed here
975-0999-01-01
buttons can be used to cycle
button for three seconds to enter
2
OUTPUTBATTLOAD

kW
VA
%
ERROR
Hz
OVERLOAD
100%
25%
To change the default value to a different value:
1. Press and hold the
Configuration mode.
2. Press the Scroll
button to scroll through the different
settings. Press and hold for three seconds to scroll back one
step.
3. Press the button to select a general setting and change
its value. Also press, to select a sub-setting, if applicable.
4. Press the Scroll button to change the value until you
reach the desired value. Press and hold for three seconds to
scroll back one step.
5. Press the button to confirm the change.
6. Repeat the previous steps to set other settings.
7. Press the
button to exit the Configuration mode.

Adjusting Settings in Configuration Mode

button for three seconds to enter the
31