Fixed Voltage Mode; Optional Accessories; Indicator Lights And Settings On The Front Panel - Xantrex Truecharge 20+ Amp Owner's Manual

Introduction

Fixed Voltage Mode

Optional Accessories

Battery
Temperature
Sensor
Remote panel

Indicator Lights and Settings on the Front Panel

1–4
The fixed voltage mode setting is meant to be used as a power supply or
battery eliminator. It is not meant for charging batteries. The battery type,
battery temperature, and equalize switches are all ignored in fixed voltage
mode. The remote battery temperature sensor does not compensate the
voltage, but the battery over-temperature shutdown is still active.
The remote Battery Temperature Sensor (BTS) automatically adjusts the
charge according to the temperature of one of the batteries. With a BTS
installed, the unit provides a more accurate temperature-compensated
charge for the battery to which the sensor is attached.
The remote panel allows you to monitor the charging progress of two
batteries or battery banks, the total charge current, and charger status from
a convenient location.
This section describes the parts of the front panel of the Truecharge 20+.
Figure 1-1 shows the front panel. Descriptions are provided in
1
3
4
5
Figure 1-1 Front panel of Truecharge 20+ battery charger
Table 1-1
2
6