Xantrex Freedom EX 4000 Owner's Manual page 9

WARNING
ELECTRICAL SHOCK HAZARD
Replace the wiring compartment cover before turning on
n
power to this equipment.
Use a torque screwdriver to tighten the captive nut panel
n
screw to 5 in-lb (0.56 N-m) torque to ensure a proper ground
connection and a required tool access to the wiring
compartment.
Failure to follow these instructions can result in death, serious
injury, or equipment damage.
975-0999-01-01
HAZARD OF ELECTRICAL SHOCK AND FIRE
Do not open. No serviceable parts inside. Provided with
n
integral protection against overloads. Bonding between
conduit connections is not automatic and must be provided
as part of the installation.
Read manual before installing or using.
n
Do not cover or obstruct ventilation openings.
n
Do not mount in zero-clearance compartment – overheating
n
may result.
Do not expose to rain or spray.
n
Install GFCI protection of branch circuits connected to the AC
n
output per electrical code requirements.
Do not connect AC OUT to any other source of power.
n
Damage to unit may occur.
For AC IN and AC OUT, use wires suitable for at least 75°C.
n
Failure to follow these instructions can result in minor or
moderate injury.
CAUTION
ix