Freedom Inverter/Charger Configuration - Xantrex 806-1020 Owner's Manual

Freedom HF InvChg Owners Guide.book Page 9 Wednesday, September 13, 2017 6:20 PM

Freedom Inverter/Charger Configuration

Setting Battery Types on the Main Unit
You can attach different types of lead-acid batteries to the Freedom
HF. Before installing batteries make sure that you configure the unit
to optimize the charging process.
The settings can be changed by adjusting the dip switches found on
the main unit behind the display panel.
Battery Dip Switch
Type Setting
Switch 1|Switch 2
Fixed OFF|OFF
Flooded OFF|ON (default)
GEL ON|OFF
AGM ON|ON
975-0390-01-01
Bulk/ Float
Absorption
13.5 13.5
14.4 13.5
14.2 13.8
14.3 13.4
To adjust the battery type setting:
By default the battery type is set to Flooded (OFF|ON) for all
models except Freedom HF 1800 T (806-1840-03) which is set to
AGM (ON|ON).
1. Detach the Display Panel to expose the Dip Switches.
2. Use the tip of your fingernail or a small screw driver with a flat
tip to adjust the switches.
OFF
Switch 1 | Switch 2
Figure 2 Dip Switches (Default Settings Shown)
ON
9