Xantrex Freedom EX 4000 Owner's Manual page 6

Product Safety Information
1. Before using the inverter/charger/converter, read all
instructions and cautionary markings on the unit, the
batteries, and all appropriate sections of this guide.
2. Use of accessories not recommended or sold by the
manufacturer may result in a risk of fire, electric shock, or
injury to persons.
3. The inverter/charger/converter is designed to be connected
to both DC and AC electrical systems. The manufacturer
recommends that all wiring be done by a certified technician
or electrician to ensure adherence to the local and national
electrical codes applicable in your jurisdiction.
4. To avoid a risk of fire and electric shock, make sure that
existing wiring is in good condition and that wire is not
undersized. Do not operate the inverter/charger/converter
with damaged or substandard wiring.
5. Do not operate the inverter/charger/converter if it has been
damaged in any way.
6. This unit does not have any user-serviceable parts. Do not
disassemble the inverter/charger/converter except where
noted for connecting wiring and cabling. See your warranty
for instructions on obtaining service. Attempting to service
the unit yourself may result in a risk of electrical shock or
fire. Internal capacitors remain charged after all power is
disconnected.
7. To reduce the risk of electrical shock, disconnect both AC
and DC power to or from the inverter/charger/converter
before attempting any maintenance or cleaning or working
on any components connected to the
vi
inverter/charger/converter. Do not disconnect under load.
Turning the inverter/charger/converter to Standby using the
Power button on the front panel will not reduce an electrical
shock hazard.
8. The inverter/charger/converter must be provided with an
equipment-grounding conductor connected to the AC input
ground.
9. Do not expose this unit to rain, snow, or liquids of any type.
This product is designed for dry-locations-use only. Damp
environments will significantly shorten the life of this product
and corrosion caused by dampness will not be covered by
the product warranty.
10. To reduce the chance of short-circuits, always use insulated
tools when installing or working with this equipment.
11. Remove personal metal items such as rings, bracelets,
necklaces, and watches when working with electrical
equipment.
12. For marine applications, this unit must be installed with a
drip shield. Refer to the Installation Guide (doc number: 975-
0998-01-01) for details.
Freedom EX 4000 Owner's Guide