Adjusting Feature Settings In Configuration Mode - Xantrex Freedom XC 1800 Owner's Manual

Adjusting Feature Settings in
Configuration Mode
The , Scroll , and
through the various feature settings:
1. Press and hold the
feature settings mode.
2. Press the Scroll button to move through the different
feature settings. Press and hold for three seconds to go
back one step.
1
INPUTBATTTEMP


kW
VA
AC
% C
Hz
BYPASS
CHARGING
1 setting number is displayed here
2 setting value is displayed here
975-1175-01-01
buttons can be used to cycle
button for three seconds to enter the
2
OUTPUTBATTLOAD

kW
VA
%
ERROR
Hz
OVERLOAD
100%
25%

Adjusting Feature Settings in Configuration Mode

To change the default value to a different value:
1. Press and hold the
feature settings mode.
2. Press the Scroll
button to move through the different
feature settings. Press and hold for three seconds to go
back one step.
3. Press the button to select a setting number and change
its value.
4. Press the Scroll button to change the value until you
reach the desired value.
5. Press the button to confirm the change.
6. Repeat the previous steps to set other feature settings.
7. Press the
button to exit the feature settings mode.
button for three seconds to enter the
43