Xantrex Freedom EX 4000 Owner's Manual page 21

Ignition Control The Freedom EX 4000 provides two user-
selectable options for ignition control:
Ignition Lockout: The Freedom EX
n
4000 features the ability to inhibit the
inverter/charger/converter from
operating in the absence of a voltage
signal from a vehicle's ignition circuit.
This is particularly useful if the
inverter/charger/converter is required to
operate only when a vehicle's engine is
running.
Ignition Auto-on: The Freedom EX
n
4000 can automatically turn the
inverter/charger/converter on and off in
tandem with the vehicle's ignition circuit
or a manually operated remote switch.
Configurable AC The Freedom EX 4000 is factory set to 60 Hz
Output Voltage AC output frequency and 120 V AC output
voltage. The AC output voltage setting can be
configured between 105 and 130 volts.
975-0999-01-01
Load The Freedom EX 4000 has a built-in 50A
Management transfer relay that connects the inverter
output or AC input from the AC source to the
loads. AC power sources are from the grid
(shore) usually or from a small generator
which often have limited current availability.
Thus, having the capability to manage your
AC loads is extremely valuable. The Freedom
EX 4000 provides a number of features to
facilitate this.
The charger is power factor corrected to
n
use AC current as efficiently as
possible. Minimizing the AC current
used by the charger means more current
is available for your AC loads.
The Freedom EX 4000 has a power
n
share feature which prioritizes your AC
loads by reducing the charge current
and maintaining the total input current to
less than the breaker setting.
Materials List
5