Communications Panel - Xantrex Freedom EX 4000 Owner's Manual

Communications Panel

Communications Panel
1 2 3 4
Figure 3 Communications Panel
10
5 6 7
8
ELECTRICAL SHOCK HAZARD
Use a torque screwdriver to tighten the captive nut panel screw to
5 in-lb (0.56 N-m) torque of force to ensure a proper ground
connection and a required tool access to the wiring compartment.
Failure to follow these instructions can result in death, serious
injury, or equipment damage.
Table 2 Communications Panel Features
Feature
20-pin CC (communications and control) port
1 connects with the optional Communications and
Control 20-pin Harness (sold separately).
RV-C ports. Use the top and bottom ports to connect
2
a
an RV-C device.
Sync ports. Use either top or bottom ports to
connect a second Freedom EX 4000
3
Inverter/Charger with 48VDC-to-12VDC Converter
unit for series or parallel stacking.
a
RV-C is a communications protocol based on the Controller Area Network (CAN) bus protocol. RV-C is
used primarily in the control, coordination, and diagnostics of multi-branded equipment in recreational
vehicles.
WARNING
Description
Freedom EX 4000 Owner's Guide