Precautions When Placing The Unit; Regulatory - Xantrex Freedom EX 4000 Owner's Manual

Precautions When Placing the Unit

Precautions When Placing the
Unit
FIRE HAZARD
Do not install the inverter/charger/converter or any part of its
n
supplied wiring in engine compartments.
For marine installation, always locate the
n
inverter/charger/converter away from the battery and
mounted separately in a well-ventilated compartment with
adequate space.
Failure to follow these instructions can result in death, serious
injury, or equipment damage.
BURN HAZARD
Avoid touching the external surfaces as they may be hot.
Failure to follow these instructions can result in injury or
equipment damage.
xii
WARNING
CAUTION
NOTICE
RISK OF INVERTER/CHARGER/CONVERTER DAMAGE
Never allow battery acid to drip on the
n
inverter/charger/converter when reading specific gravity, or
filling battery.
Never place the Freedom EX 4000 unit directly above
n
batteries; gases from a battery will corrode and damage the
inverter/charger/converter.
Do not place a battery on top of the
n
inverter/charger/converter.
Failure to follow these instructions can result in equipment
damage.

Regulatory

The Freedom EX 4000 inverter/charger/converter is certified to
appropriate US and Canadian standards. For more information
see Regulatory approvals on page 64.
The Freedom EX 4000 inverter/charger/converter is intended to be
used for recreational, commercial, or other mobile applications.
This inverter/charger/converter is designed for marine applications
only when additional drip protection is installed in certain
orientations. See the Installation Guide (doc number: 975-0998-
01-01) for information.
Freedom EX 4000 Owner's Guide