Introduction
Information Centers of the BC Series
Onboard Status Panel
This section describes the parts of the onboard status panel of the BC Series.
Figure 1-2 shows the panel.
2
3
4
Figure 1-2 BC Series Status Panel
Item
Description
1
Charge Current
•
Displays the output charge current in % for the bank being charged
•
100% indicator light flashes to indicate battery temperature too high (> 50 °C, 122 °F)
•
10% indicator light flashes to indicate battery temperature too low (< 0 °C, 32 °F)
•
25% indicator light flashes to indicate that a battery has been disqualified (see page 2–4)
2
Charger Status -
•
Ready indicator light illuminated indicates all batteries are fully charged, and are now in
float or rest
3
Charger Status -
•
Charging indicator light illuminated indicates unit is performing a normal charge cycle
•
Charging indicator light flashing indicates that the unit is performing an equalization cycle
4
Charger Status -
•
Fault indicator light continuously illuminated indicates any fault condition that prevents
the BC Series from charging one or more batteries, but is not a charger failure - optional
remote display shows details of fault
•
Fault indicator light flashing indicates the BC Series has experienced a charger failure -
optional remote display shows
1–4
READY
CHARGING
FAULT
e r r
followed by
C H f
1
975-0188-01-01