Ac/Dc And Gfci Panel - Xantrex Freedom XC 1800 Owner's Manual

AC/DC and GFCI Panel

1
10 9
12
5
13
Figure 2 AC/DC and GFCI Panel
975-1175-01-01
2 3
8 7 6
11
14 13
ELECTRICAL SHOCK HAZARD
Use a torque screwdriver to tighten the captive nut panel screw to
5 in-lb (0.56 N-m) torque of force to ensure a proper ground
connection and a required tool access to the wiring compartment.
4
Failure to follow these instructions can result in death, serious
injury, or equipment damage.
5 Table 1 AC/DC and GFCI Panel Features
Feature
1 ACC input port for connecting ignition control
wiring. Ignition Control Switch (ACC) for connecting
[ON (|)] and disconnecting [OFF (O)] the ignition
signal.
2 Remote port allows you to connect an accessory
remote control/display device.
12
3 Captive nut panel screw holds the wiring
compartment cover in place. See WARNING above.
4 Ventilation grille (openings) must not be obstructed.
5 DC Grounding lug provides a ground path for the
Freedom XC chassis to the DC system ground. See
the following WARNING.
AC/DC and GFCI Panel
WARNING
Description
7