Ac/Dc And Gfci Panel - Xantrex Freedom XC 1000 Owner's Manual

AC/DC and GFCI Panel

AC/DC and GFCI Panel
1 2
10 9
12
5
13
Figure 2 AC/DC and GFCI Panel
8
3
8 7 6
11
12
14 13
ELECTRICAL SHOCK HAZARD
Use a torque screwdriver to tighten the captive nut panel screw to
5 in-lb (0.56 N-m) torque of force to ensure a proper ground
connection and a required tool access to the wiring compartment.
4
Failure to follow these instructions can result in death, serious
injury, or equipment damage.
5
Table 1 AC/DC and GFCI Panel Features
Item
ACC input terminal for connecting ignition control wiring.
1 Ignition Control Switch (ACC) for connecting [ON (|)] and
disconnecting [OFF (O)] the ignition signal.
Remote port allows you to connect an accessory remote
2
control / display device.
Captive nut panel screw holds the wiring compartment
3
cover in place. See WARNING above.
4 Ventilation grille (openings) must not be obstructed.
Grounding lug provides a ground path for the Freedom
5
XC chassis to the DC system ground. See WARNING.
6 DC terminal opening for routing (–) negative DC cable.
WARNING
Description
Freedom XC Owner's Guide