Intended Use - Otto Bock Myo Plus Instructions For Use Manual

Myo Plus TR
2
2.3 Combination possibilities
This product can be combined with the following Ottobock components:
Terminal devices
INFORMATION
The 13E190=* switch block has to be used for combination with the 8E34=*, 8E39=*, 8E41=*
and 8E71=* terminal devices.
• System Electric Hand DMC plus: 8E38=6,
8E39=6
• Sensor Hand Speed: 8E38=8, 8E39=8
• MyoHand VariPlus
8E39=9, 8E41=9
• Transcarpal Hand DMC plus: 8E44=6
INFORMATION
Connected terminal devices must be in a proportional 2-channel mode.
Active rotation
• 10S17 electric wrist rotator
• 10S1=* lamination ring
Passive rotation
• 9E169 coaxial plug
• 10S4 coupling piece
• 10S1=* lamination ring
Rechargeable battery
• 757B35=5 MyoEnergy Integral
• 757B35=3 MyoEnergy Integral
• 757B20 EnergyPack
• 757B21 EnergyPack

3 Intended use

3.1 Indications for use
Myo Plus is to be used exclusively for exoprosthetic fittings of the upper limbs.
6
Speed: 8E38=9,
The Myo Plus TR (1) receives the signals from
the remote electrodes and converts them into
control signals for the prosthesis components
(hand, rotation). Up to 8 remote electrodes can
be connected to the Myo Plus TR.
To secure the remote electrode plug connec­
tions, slide the cable protection cap (2) onto
the Myo Plus TR.
• System Electric Greifer DMC VariPlus:
8E33=9, 8E34=9
• DMC VariPlus System Electric Greifer:
8E33=9-1, 8E34=9-1
• bebionic hand EQD: 8E70=*
• bebionic hand Short Wrist: 8E71=*
• bebionic hand Flex: 8E72=*