Product Description; Intended Use - Otto Bock E-MAG Active Instructions For Use Manual

2 Product description

2.1 Available sizes
Article number
17B203=L/R,
17B203=L/R-7.5
17B203=L/R,
17B203=L/R-7.5
2.2 Construction and Function
The E-MAG Active is an orthotic knee joint with stance phase control which offers you a free swing phase and
locks the orthotic knee joint for the stance phase prior to heel strike. The orthotic knee joint determines the position
of your leg with the help of the electronics and enables the swing phase. Read the 646D1043 "Quick start guide"
for more information.
The E-MAG Active is an orthotic knee joint with a concealed locking mechanism, which means that the joint is less
susceptible to dirt and also prevents clothing from becoming trapped. Not only is this gentle on your clothing but,
above all, offers you enhanced safety.
The E-MAG Active has an additional locking function (PreLock) that is activated at 15° knee flexion. This secures
the orthotic knee joint before the swing phase ends. The orthotic knee joint is then fully locked when it reaches the
extension stop.
Two buttons allow you to electronically unlock the orthotic knee joint (once) or engage the lock (permanently). In
addition, the (temporary) mechanical unlocking mechanism supports a wider area of application, for example when
cycling. These instructions for use describe the functions and operation of the E-MAG Active as well as how to
charge it and care for it.
2.3 Product overview
1
(see fig. 1), item
1
2
3
4

3 Intended use

3.1 Indications for use
The product is intended solely for orthotic fittings of the lower limbs.
17B203=* E-MAG Active
Material Pre-flexion
Steel 5° and 7.5°
Steel 5° and 7.5°
Component
Orthotic knee joint
Unlocking mechanism
Battery
Electronics
17B206 medial support
Without medial support
With medial support
Product description
Max. body weight
Up to 85 kg
Up to 100 kg
11