Lighting; Lighting For Road Traffic; Lighting For Footpaths - Otto Bock Skippi Instructions For Use Manual

Use
The depth position of the control panel is subsequently adjustable.
37

8.15.2 Lighting

Information on replacing broken lamps: see Page 58.

8.15.2.1 Lighting for road traffic

The installed lighting is suitable for driving in street traffic during hours of darkness.
The lights, right and left direction indicators and the warning flashers are operated via the control panel.
Front lighting
The 2 front lights (see fig. 38, left) each encompass a direction indicator lamp (bottom left) and an LED front lamp
(top left).
The front lights are fastened to the self-contacting side panels.
38
39

8.15.2.2 Lighting for footpaths

This lighting makes driving on footpaths easier during hours of darkness. Power wheelchairs with this equipment
are not permitted for use in road traffic.
48
Adapting the control panel position to the forearm
length
1) Loosen the 3 set screws on the bottom of the arm­
rest.
2) Slide the rail with the control panel forwards or
backwards.
INFORMATION: If the control panel rail is too
long it can be shortened. Please contact the
qualified personnel who adjusted your product.
3) Tighten the 3 set screws on the bottom of the arm­
rest.
Side panel removal/installation
1) Loosen the thumb screw on the side panel holder.
2) Pull the side panel out from the side panel holder
and set it aside.
INFORMATION: When the side panels are
inserted into the side panel holders the con­
tacts touch each other and current can flow
(see fig. 38, right).
INFORMATION: Carefully let the side panel with
the control panel hang down.
3) Insert the side panel back into the side panel hold­
er.
4) Re-tighten the thumb screw on the side panel hold­
er.
Rear lighting
The rear lights encompass 2 LED rear lamps with integ­
rated direction indicators.
Skippi