Lighting - Otto Bock C2000 Instructions For Use Manual

33

8.14 Lighting

Information on replacing broken lamps: see Page 63.
The installed lighting is suitable for driving in street traffic during hours of darkness.
The lights, right and left direction indicators and the warning flashers are operated via the control panel.
Front lighting
The 2 front lights (see fig. 34, left) each encompass a direction indicator lamp (bottom left) and an LED front lamp
(top left).
The front lights are fastened to the self-contacting side panels.
34
35
C2000
The power wheelchair is equipped with a luggage carri­
er.
The luggage carrier can be used to mount an artificial
respiration platform or to store luggage.
Side panel removal/installation
1) Loosen the thumb screw on the side panel holder.
2) Pull the side panel out from the side panel holder
and set it aside.
INFORMATION: When the side panels are
inserted into the side panel holders the con­
tacts touch each other and current can flow
(see fig. 34, right).
INFORMATION: Carefully let the side panel with
the control panel hang down.
3) Insert the side panel back into the side panel hold­
er.
4) Re-tighten the thumb screw on the side panel hold­
er.
Rear lighting
The rear lights encompass 2 LED rear lamps with integ­
rated direction indicators.
Use
47