Scope Of Delivery; Removing The Product Components From The Case - Otto Bock Bionic Pro Instructions For Use Manual

Scope of delivery

743A250 Bionic Pro functionality (10 metre gait analysis)
The 743A250 Bionic Pro in conjunction with the 10 metre gait analysis is intended for gait analysis in order to use
the measurement results to provide objective evidence of how a device (orthosis/prosthesis) affects the gait pat­
tern.
: To carry out the measurement, the 743A250 Bionic Pro requires seven sensors (one in the pelvic region, one
each in the heel region on both feet and one each on the lateral side of the thigh and lower leg on both legs). For
prostheses without a foam cover, the sensor is inserted into the sensor holder
adapter at the level of the calf.
: The patient walks along a straight course for 10 m. The patient's gait can optionally be recorded with the iPad
camera during measurement. The base station evaluates the results of the measurements and displays the result in
the graphical user interface in the browser of the iPad.
3 Scope of delivery

3.1 Removing the product components from the case

3
► Always use the product case for transportation.
The illustration shows where the product components are placed in the upper and lower sections of the case.
► NOTICE! To avoid damage during transportation, do not expose the product to severe vibrations, extreme tem­
peratures and high relative humidity.
► Lift and transport the case by the handle.
► Use the supplied packaging material or an equivalent for shipping.
► Remove the product components from the case to check the scope of delivery.
8
that is attached to the tube
743A250 Bionic Pro