Use
5.7.1 User interface system messages
46
User interface system messages are displayed in a warning window .
The system message can be temporarily ignored by selecting "Update later" . In this case, the red warning
icon
reminds you of the ignored system messages by calling your attention to them. The digit in the red circle
indicates the number of ignored system messages. Tapping the red warning icon displays the list
messages which can in turn be accessed again and then processed by tapping them.
5.7.1.1 "No connection to sensor" system message
47
Take the following steps for the "No connection to sensor" error message:
► Tap the "OK" button.
► Check whether the sensor is switched on ("Charging sensors in the base station and switching them on prior
to measuring" section – see page 15).
► Check the LED signal of the sensors ("Charging sensors in the base station and switching them on prior to
measuring" section – see page 15).
5.7.1.2 "Low sensor battery level" system message
48
Take the following steps for the "Low sensor battery level" error message:
► Insert the sensor in the base station for charging ("Charging sensors in the base station and switching them on
prior to measuring" – see page 15).
► Once the sensor is charged, tap the "OK" button.
36
of system
743A250 Bionic Pro