Scope Of Delivery; Technical Data; Preparing The Product For Use - Otto Bock Dynion 3R85 Instructions For Use Manual

Hide thumbs Also See for Dynion 3R85:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 37
Do not reach into the joint mechanism during use.
Close attention is required during assembly and adjustment tasks.
CAUTION
Mechanical damage to the product
Risk of injury due to change in or loss of functionality
Use caution when working with the product.
If the product is damaged, check it for proper function and readiness for use.
In case of changes in or loss of functionality, do not continue using the product (see "Signs
of changes in or loss of functionality during use" in this section).
Take any necessary measures (e.g. repair, replacement, inspection by the manufacturer's
customer service, etc.).
Signs of changes in or loss of functionality during use
Changes in functionality can manifest themselves, for example, through a changed gait (swing
phase, stance phase), incomplete extension, stiffness and the development of noise.

5 Scope of delivery

4
 (Page: 3): Check the scope of delivery against the illustrations.
Only product components with reference numbers in the illustration can be reordered separately.
A product component without a reference number in the illustration cannot be reordered separ­
ately.
Reference numbers in brackets "()" indicate which alternative products can be reordered as
replacements for the included product component.
In the illustration, a reference number shown in bold stands for a spare parts package in which
the product components shown in the frame can be reordered.

6 Technical data

5
6
 + 
 (Page: 4): See the illustrations for the technical data.
: Build height;
: System height;

7 Preparing the product for use

7.1 Information on fabrication of a prosthesis
CAUTION
Incorrect alignment, assembly or adjustment
Injury due to incorrectly installed or adjusted as well as damaged prosthetic components
Observe the alignment, assembly and adjustment instructions.
CAUTION
Initial use of the prosthesis by the patient
Fall due to lack of patient experience, incorrect alignment or incorrect adjustment of the pros­
thesis
For the safety of the patient, use a suitable device (e.g. parallel bars, handrail, wheeled
walker) during initial standing and walking.
40
: Proximal build height;
: Proximal system height;
: Distal build height;
: Distal system height

Advertisement

Table of Contents
loading

Table of Contents