Product Description - Otto Bock Bionic Pro Instructions For Use Manual

Table of Contents

Advertisement

2 Product description

743A250 Bionic Pro product overview
2
The Bionic Pro consists of the following main components:
: Base station with mains plugs
: Sensors (7x)
: Thigh belt with one extension (2x)
: Sensor holders (for tube adapter: 1x for
Ø 30 mm, 1x for Ø 34 mm)
: Router with mains plugs
General functionality
The Bionic Pro is suitable for conducting analyses on adults and children aged 12 years and up who are able to
stand in the neutral zero position and to make full ground contact with their feet while walking.
: The sensor holders and extension straps are used to position the sensors on the patient. The sensors record
the patient's movements and send the measured data to the base station via the router. The base station evaluates
the measured data from all the sensors and visualises the results on the graphical user interface, which is dis­
played in the iPad browser.
743A250 Bionic Pro functionality (drop foot fitting assessment)
The 743A250 Bionic Pro in conjunction with the drop foot fitting assessment is intended for movement analyses
when testing and comparing different dorsiflexion-assist orthoses. The results of the measurements make it pos­
sible to provide objective evidence regarding which orthosis is most suitable for the patient.
: To carry out the measurement, the 743A250 Bionic Pro requires five sensors (one in the pelvic region, one
each in the heel region on both feet and one each on the lateral side of the thigh and lower leg of the leg to be fit­
ted). Sensors TL and CL are not used in the drop foot fitting assessment.
: First, the patient walks along a straight course for 10 m without an orthosis. Then the measurement is repeated
with the orthoses that are to be compared with one another. The base station evaluates the results of the measure­
ments and displays the result in the graphical user interface in the browser of the iPad. The patient's gait can
optionally be recorded with the iPad camera during measurement.
743A250 Bionic Pro
: iPad with mains plugs
: Pelvic belt with two extensions
: Calf belt with one extension (2x)
: Foot clip (2x)
: Case
Product description
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

743a250743a250 bionic pro

Table of Contents