5.7.3 Measures
5.7.3.1 Check connections to LAN and WLAN
50
The correct LAN and WLAN connections can be identified by the following aspects:
•
: If the date and time are displayed on the router screen, the router has set up the WLAN and is connected to
the Internet.
•
: If the sensor LEDs modulate in the colour blue, they are connected to the base station via the WLAN of the
router.
•
: If all LEDs on the base station are illuminated, the WLAN connection to the sensors via the router is work
ing.
•
: The iPad settings show whether the iPad is connected to the WLAN of the router (WLAN name contains
"bionicpro").
► If all these criteria are satisfied and there are still problems with the WLAN connection, follow the instructions
in the "Preventing electromagnetic interference" section (see page 17).
5.7.3.2 Resetting frozen user interface (timeout)
51
For which customer do you want to perform an analysis?
customer
If the user interface does not respond despite tapping various buttons a number of times, it has timed out due to
inactivity (user interface has not been used for approx. 60 minutes). The login screen opens when the "Reload"
icon
is tapped. You can continue working after logging in again.
743A250 Bionic Pro
100 %
1234567.bionicpro.local
Bionic Pro start page
Welcome!
Existing
New
customer
?
Enter user name
100 %
1234567.bionicpro.local
Welcome!
Please log in
with your PIN:
••••••
PIN
Log in
Support
Bionic Pro
Use
39