Use; Switching On; Preventing Electromagnetic Interference - Otto Bock Bionic Pro Instructions For Use Manual

Table of Contents

5 Use

► NOTICE! In order to avoid damage use the product exclusively according to the instructions for use, the quick

reference guide and the online help of the product.

INFORMATION

The QR codes, nameplates and passwords contained in the illustrations are only samples and may not be used.

Only the QR codes in the iPad user manual are intended for use (may be changed by Apple).

► Follow the sequence shown in the illustrations when switching on the product and adhere to the waiting times

so the product components connect with one another properly via WLAN.

The individual product components (base station, sensors, router) are connected with each other via WLAN and

enable the required exchange of data. Other devices that produce electromagnetic fields or networks can cause

electromagnetic interference that slows the exchange of data or makes it impossible. This may mean that a meas

urement needs to be repeated. Electromagnetic interference may be indicated by error messages on the user inter

face or manifest itself by the user interface working more slowly. The following instructions help to prevent or elim

inate electromagnetic interference.

► Do not use the product in areas with strong electromagnetic fields (e.g. in the proximity of magnetic resonance

imaging equipment, microwaves and machines).

► During use of the product, ensure that other high-frequency devices, such as mobile phones, smartphones,

tablets and routers do not come within the required safety distance of at least 300 mm to the product compon

ents (base station, sensors, router).

► Refer to the instructions in the "Troubleshooting" (see page 35) section and its subsections in the event of

faults or error messages.

→ If this does not remedy the faults, switch off all other high-frequency devices.

→ If this does not remedy the faults, use the product in a different room.

→ If this does not remedy the faults, contact the manufacturer.

743A250 Bionic Pro

~ 2 min

Use

Table of Contents

743a250743a250 bionic pro