Range Selection (Registering Depth Ranges); All Reset (Restoring The Original Settings) - Icom FP-561 Instruction Manual

5
INITIAL SETTING AFTER INSTALLATION
5-5 RANGE SELECTION
RANGE SELECTION
UNIT: FT
20 40
120 140
220 240
500 600
1000 1100
1500 1600
2000 END
CANC
CLR
Ranges you have selected: White
Ranges you have not selected: Red
Units of Depth range
m (meters)
(default)
FT (feet)
FM (fathoms)
5-6 ALL RESET
SET MODE
UNIT
SETTING
RANGE SELECTION
ALL RESET
RESET ALL SETTINGS ?
CANC
CLR
67
This section describes how to register your most-used depth ranges among
31 depth ranges.
q Select "Range Selection" on the SET MODE screen using the [UP] or [DOWN]
key and press the [SET] key.
The Depth Range Selection screen will appear.
60 80 100
w Select a desired range using the [UP]/[DOWN] or [LEFT]/[RIGHT] key and press
160 180 200
260 300 400 the [SET] key.
700 800 900
The selected range turns white.
1200 1300 1400
e Repeat step w until all of your desired ranges turn white.
1700 1800 1900
Ranges you have not selected are show in red.
To undo your selection, press the [CLR] key.
r When you finish range selection, move the cursor to "END" and press the [SET]
or press the [MENU] key.
SEL
SET
SET The selections are saved, and you will return to the SET MODE screen.
5
10 20 30
240
260 280 300 320
20
40 100
60 80
600
700 1000
800 900
3
5 10 15
120
130 160
140 150
Any changes you made to the system parameters can be restored to the orig-
inal settings (defaults).
To do this, proceed as follows.
q Select "ALL RESET" on the SET MODE screen using the [UP] or [DOWN] key
and press the [SET] key.
The selected item turns blue and a message will appear, indicating that you are
going to reset all the setting items.
w Press the [SET] key.
All the setting items default to their original state.
• Press [CLR] to cancel the function.
WARNING:
When "All Reset" is selected and the [SET] key is pressed, all of your settings,
including registered routes and marks, are lost and cannot be restored.
OK
SET
Standard depth ranges
40 50 60 70 80
350 400 440 450
120 140 160 180
1100 1200 1300 1400
20 25 30 35 40
180 200 220 240
100 120 140 160 180
480 500 520 560 600
200 220 240 260 300
1500 1600 1700 1800 1900
50 60 70 80
260 280 300 320 340
200 220
640
400
500
2000
90 100 110
350