Connection For D-Sub Plug Of Sensogrip - KLS Martin group marLED E3 Service Manual

9.13.3

Connection for D-Sub Plug of sensoGrip

90
Operating Lights marLED® E3, E9, E9i, E15, battery and
marLED® E3 on ceiling tube Ø 110 mm
"Standard" cable set with connector (1) for connection
to control electronics board.
Connector (1) on control electronics board.
"Camera" cable set with connectors (1, 2, 3).
Connectors (1, 2, 3) on control electronics board and
surgiCam daughterboard.
For information on how to retrofit the surgiCam
daughterboard, see section 9.12 "Mounting and
Connecting the surgiCam Daughterboard", page 86.
Such retrofit is possible only if the light has 9-pole
wiring.
Service Manual
Revision 2