Wall Control Panel; Connecting A Wall Control Panel From Hw 37; Connecting A Wall Control Panel Hw 30 - Hw 36 - KLS Martin group marLED E3 Service Manual

Service Manual
Operating Lights marLED® E3, E9, E9i, E15, battery and
marLED® E3 on ceiling tube Ø 110 mm
10

Wall Control Panel

10.1

Connecting a Wall Control Panel from HW 37

Revision 2
•
Push the cover glass (5) into the opening in
direction (B) until it snaps into place.
•
Check the seal of the cover glass for correct fit.
This completes the light engine mounting process.
The wall control panel from HW 40 is equipped
with an RJ45 connection.
1 Wall control panel, open
2 RJ45 cable
99