KLS Martin group marLED E3 Service Manual page 146

marLED® E3 as part of a light system
1 Mains cable
2 Central equipotential bonding terminal
•
Measure the resistance between central equipotential bonding terminal (2) and the locations indicated
in the illustration.
•
Enter the highest value into the inspection plan.
146
Operating Lights marLED® E3, E9, E9i, E15, battery and
marLED® E3 on ceiling tube Ø 110 mm
3 Measuring instrument
4 Measuring leads
Service Manual
R = 0.3 Ω
imax
Revision 2