Surgicam Serial Number - KLS Martin group marLED E3 Service Manual

13.4.2

surgiCam Serial Number

New structure of the surgiCam serial number provided on the rating plate of the camera, the control unit
surgiCam and the arm system:
Product type
1 2 3 4 5 6 7 XX_XX
m T V C K A 5 XX_XX
5=FEO system
1=Network server type 1
Camera
Total system version
used for marLux (until April 2009)
E = Economy
B = Basic
V = Advanced version (MPEG)
C = surgiCam SD
Additional rating plate information:
For cameras in central handle (sensoGrip) additionally below the
serial number of the light and on the camera (inside sensoGrip)
For camera mounting preparation sets additionally below the
serial number of the light
During July and November 2009, different designations were used
for the planned 9-pole wiring system.
170
Release Designation
HW_SW
Year of
build
XX
XX
Year of manufacture
HW and SW release
Z = in central handle (sensoGrip)
A = on separate arm
_ = N/A
Operating Lights marLED® E3, E9, E9i, E15, battery and
Version Consec.
no.
X XXX_
N XXX_
surgiCam SD N = NTSC
P = PAL
surgiCam HD Y = HD YPbPr (analog video)
Indicates through-cabling and stops,
from Nov. 2009
S = 9-pole plug, HD
Indicates HD rotary connector and HD
slip rings, from March 2012
Control unit B = Basic
V = Advanced version (MPEG)
H = HD ready
Net-Server S = with camera system
A = standalone device
Standalone version
used for marLED® from October 2008
S=control unit
K=surgiCam (camera)
N=network server
H=surgiCam HD
mTV CKZ5 xxxx
KV surgiCam SD
surgiCam HD: KV HD Y (through-cabling)
surgiCam HD: KV HD S
(for HD rotary connector and HD slip rings)
until 2009
July to Nov. 2009
marLED® E3 on ceiling tube Ø 110 mm
Servicing Servicing
done by
HW_SW
KV HD SDI
KV HD YPbPr
Service Manual
Revision 2