11.1.1
Design including Miniature Fuses from HW 40
Fig. 11-1:
Control electronics marLED® E battery from HW 40, details
1 Battery pack (2 items)
2 For development purposes only
3 Control panel, buttons
4 Control panel, LED
5 D-Sub to sensoGrip
6 VDC+ Master of (9)
9 Cable connection terminal for supply voltage, for pin assignment see section 9.13.2 "Connection terminal for
Supply Voltage/CAN Bus", page 89.
108
Operating Lights marLED® E3, E9, E9i, E15, battery and
marLED® E3 on ceiling tube Ø 110 mm
7 Miniature fuse, T 6.3 AH, 250 V
8 VDC+ Slave of (9)
10 DIP switch
11 Programming interface
12 GND
Service Manual
Revision 2