Huvitz EXCELON Service Manual page 37

6. If necessary, clean the Main Shaft.
7. Spread a little of mechanical grease into the center hole of the new Wheels.
8. Replace the Wheels with new ones in reverse order. Be sure to check the wheel rotation direction.
7. Assemble all parts in reverse order.
Caution
Be careful of the insertion direction and order of the Grinding Wheels.
Adjustment needed
Check whether the Wheel Ass'y functions are right in the Test Mode.
Perform size calibration and all adjustments.
EXCELON
Ⅱ
CPE-4000 Maintenance
35
-