Advertisement
Auto Ref/Keratomet
PRODUCT
er
MODEL
CR/CRK-7000
REVISON
Fault
1. After replacing the CCD
camera without 6 points
What
1. Adjust CCDC camera position
SERVICE MANUAL
Adjust CCD camera
Faulty part
1. CCD camera position
Action
DOC No.
SCS-I-7RK-005
DATE
2015.11.17
REVISION DATE
USE
2015.11.17
Cause
When
PREPARE
REVIEW
CONFIRM
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Huvitz CR-7000
Summary of Contents for Huvitz CR-7000
- Page 1 DOC No. SCS-I-7RK-005 PREPARE REVIEW CONFIRM Auto Ref/Keratomet SERVICE MANUAL PRODUCT DATE 2015.11.17 MODEL CR/CRK-7000 REVISION DATE REVISON Adjust CCD camera 2015.11.17 Fault Faulty part Cause 1. After replacing the CCD 1. CCD camera position camera without 6 points Action What When...
- Page 2 DOC No. SCS-I-7RK-005 PREPARE REVIEW CONFIRM Auto Ref/Keratomet SERVICE MANUAL PRODUCT DATE 2015.11.17 MODEL CR/CRK-7000 REVISION DATE REVISON Adjust CCD camera 2015.11.17 Step 1. Entering engineer mode Turn on Unit(CRK-7000) Power After initial, Press button in order of 4→3→4→3→6→6 Using button 4 and 5, select [4.
- Page 3 DOC No. SCS-I-7RK-005 PREPARE REVIEW CONFIRM Auto Ref/Keratomet SERVICE MANUAL PRODUCT DATE 2015.11.17 MODEL CR/CRK-7000 REVISION DATE REVISON Adjust CCD camera 2015.11.17 Step 4. Choose "MODE" 1). Select “MODE” content and press MODE button(2 button). Appearance of Figure 2. 2).
- Page 4 DOC No. SCS-I-7RK-005 PREPARE REVIEW CONFIRM Auto Ref/Keratomet SERVICE MANUAL PRODUCT DATE 2015.11.17 MODEL CR/CRK-7000 REVISION DATE REVISON Adjust CCD camera 2015.11.17 Step 5. Adjust CCD camera position. Fixed 2 screws in Figure 4.(Do not need to tighten, so that the CCD camera can move). When you move the CCD camera, pay attention to the C and Y value on the screen.
Need help?
Do you have a question about the CR-7000 and is the answer not in the manual?
Questions and answers